 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| (888) IPD-CONVerters q (888) 473-2668 q www.ipdconverters.com XWS SERIES - 150 WATT DESCRIPTION FEATURES * Remote Sense Pins * 500V Isolation * Short Circuit Protection XWS DC/DC converters are high-powered converters * High Power Package which cover a wide range of industrial and general * Wide Input Range applications. Available input voltages include 12V, 24V, * Trim and Enable Pins 40V, and 48V; output voltages are available from 5V to 24V. The XWS features remote sense leads for accurate point of load regulation, and has short circuit and overcurrent protection. For dual and triple output high Efficiency power solutions, see the XWD and XWT series of converters, respectively. 95 90 EFFICIENCY % vs. Load (24V Input) 85 XWS2415 TECHNICAL SPECIFICATIONS Input Voltage Range 12 VDC Nominal 24 VDC Nominal 40 VDC Nominal (Wide Input) 48 VDC Nominal Input Ripple Current Reverse Input Current Output Setpoint Accuracy Line Regulation Vin Min. - Vin Max., Iout Rated Load Regulation Iout Min. - Iout Max., Vin Nom. Minimum Output Current Dynamic Regulation, Loadstep Pk Deviation Settling Time Voltage Trim Range Current Limit Threshold Range, % of Iout Rated Short Circuit Protection OVP General Turn-On Time 10 ms Remote Shutdown TTL And CMOS Compatible, Positive Logic Switching Frequency 200 kHz Isolation Input - Output 500 VDC Temperature Coefficient 0.02%/C Case Temperature Operating Range -25 To +85C Storage Range -40 To +125C Thermal Shutdown Range 105 To 115C Humidity Max., Non-Condensing 95% Vibration, 3 Axes, 5 Min Each 5 g, 10 - 55 Hz MTBF (Bellcore TR-NWT-000332) Consult Factory Safety Consult Factory Weight (Approx.) 15.4 oz 1% 0.2% Vout 1% Vout 10 % lout rated 25% Iout 4% Vo 500 s 10% 110 - 130% Continuous All Models 10 18 20 36 20% 100% 20 VDC 36 VDC 60 VDC 72 VDC I in Max. Iin Max. 80 75 10 20 30 40 50 60 70 80 90 100 LOAD % Efficiency vs. Load (48V Input) 95 90 85 80 XWS4805 EFFICIENCY % 75 70 65 10 20 30 40 50 60 XWS4815 70 80 90 100 LOAD % Notes MTBF predictions may vary slightly from model to model. Industrial temp range available Specifications typically at 25C, normal line, and full load, unless otherwise stated. Soldering Conditions: I/O pins, 260C, ten seconds; fully compatible with commercial wave-soldering equipment. Safety: Agency approvals may vary from model to model. Please consult factory for specific model information. C48 XWS SERIES - 150 WATT MODELS - (See the last page of this file for options.) Vin (Volts) 12 12 12 12 24 24 24 24 48 48 48 48 40 40 40 40 Vin Range (Volts) 10 - 20 10 - 20 10 - 20 10 - 20 18 - 36 18 - 36 18 - 36 18 - 36 36 - 72 36 - 72 36 - 72 36 - 72 20 - 60 20 - 60 20 - 60 20 - 60 Iin Max.* (Amps) 13.9 16.9 16.7 15.7 10.9 12.9 12.8 13.6 5.5 6.5 6.5 6.8 10.3 12.4 12.2 12.9 Vout (Volts) 5 12 15 24 5 12 15 24 5 12 15 24 5 12 15 24 Iout Rated (Amps) 20 10.4 8.3 5 30 15 12 8 30 15 12 8 30 15 12 8 Ripple & Noise Pk-Pk (mV) 50 120 150 240 50 120 150 240 50 120 150 240 50 120 150 240 Efficiency Typ. ** 79% 81% 82% 84% 83% 85% 86% 86% 82% 85% 85% 86% 80% 80% 81% 82% Model XWS1205 XWS1212 XWS1215 XWS1224 XWS2405 XWS2412 XWS2415 XWS2424 XWS4805 XWS4812 XWS4815 XWS4824 XWS6005 XWS6012 XWS6015 XWS6024 * Maximum input current at minimum input voltage, maximum rated output power. ** At nominal Vin, rated output. Thermal Impedance Natural Convection 100 LFM 200 LFM 300 LFM 400 LFM 2.5 2.1 1.7 1.3 1.1 C/W C/W C/W C/W C/W MECHANICAL DRAWING 5.50" (139.7mm) #4-40 THREADED INSERTS 4PLS. 2.625"(66.7mm) 1 8 2.250"(57.2mm) Note: Thermal impedance data is dependent on many environmental factors. The exact thermal performance should be validated for specific application. 2 9 1.875"(47.6mm) Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Function No Pin -Vin -Vin +Vin +Vin Enable Case -Vout -Vout +Vout +Vout - Sense Trim + Sense Tolerances 3 3.50" (88.9mm) 10 1.500"(38.1mm) 4 BOTTOM VIEW 11 1.125"(28.6mm) 5 12 0.750"(19.1mm) 6 13 0.375"(9.5mm) 7 14 0 -0.375"(-9.5mm) -0.625"(-15.9mm) -0.60" (-15.2mm) 0 4.300" (109.2mm) DIA 0.040" 13PL. (1.0mm) Inches: .XX 0.040 .XXX .010 0.92" (23.4mm) (Millimeters) .X 1.0 .XX 0.25 0.05 Pin: 0.002 C49 (888) IPD-CONVerters q (888) 473-2668 q www.ipdconverters.com XWS SERIES - 150 WATT TERMINAL STRIP OPTION MECHANICAL DRAWING #4-40 THREADED INSERTS 4PLS. DIA 0.041" 13PLS. (1.04mm) 0.52" (13.2mm) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 0.375" EA. (9.53mm) DIA 0.18" (4.6mm) 0.25" (6.4mm) 3.50" (88.90mm) 3.000" (76.20mm) 4.300" (109.22mm) 5.50" (139.7mm) 0.92" (23.4mm) PIN VIEW UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCES: .X }.030 .XX }.040 .XXX }.010 FRACTION }.030 C50 OPTIONS When ordering equipment options, use the following suffix information. Select the option(s) that you prefer and add them to the model number. Example ordering options are located below the options table. OPTION Negative Logic Lucent Compatible Trim Terminal Strip Trim Enable Trim and Enable Current Share Headerless SUFFIX N T TS 1 2 3 4 Y APPLICABLE SERIES HAS, HBD, HBS, HES, LES, QBS, QES, TES, TQD HAS, HBD, HBS, HES, QBS, QES XWS, XWD, XWT IAS, LES IAD, IAS, LES, SMS IAS, LES SMS Encapsulated EWS, IWS, OWS REMARKS TTL "Low" Turns Module ON TTL "High" Turns Module OFF PIN LENGTH AND HEATSINK OPTIONS 0.110" (2.8mm) Pin Length 0.150" (3.8mm) Pin Length 0.24" (6.1mm) Horizontal Heatsink 0.24" (6.1mm) Vertical Heatsink 0.45" (11.4mm) Horizontal Heatsink 0.45" (11.4mm) Vertical Heatsink 0.95" (24.1mm) Horizontal Heatsink 0.95" (24.1mm) Vertical Heatsink 8 9 1H 1V 2H 2V 3H 3V All Units (Except SMS) All Units (Except SMS) All Units (Except DIP, SIP, and SM Packages) All Units (Except DIP, SIP, and SM Packages) All Units (Except DIP, SIP, and SM Packages) All Units (Except DIP, SIP, and SM Packages) All Units (Except DIP, SIP, and SM Packages) All Units (Except DIP, SIP, and SM Packages) Standard Pin Length is 0.180" (4.6mm) Includes Thermal Pad Includes Thermal Pad Includes Thermal Pad Includes Thermal Pad Includes Thermal Pad Includes Thermal Pad Example Options:HBS050ZG-ANT3V = HBS050ZG-A with negative logic, Lucent compatible trim, and 0.95" vertical heatsink. LES015YJ-3N = LES015YJ with optional trim and enable, negative logic. QBS066ZG-AT8 = QBS066ZG-A with Lucent compatible trim and 0.110" pin length. NUCLEAR AND MEDICAL APPLICATIONS Power-One products are not authorized for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the President of Power-One, Inc. TECHNICAL REVISIONS The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice. C105 |
Price & Availability of XWS6015
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |